S-Access SA-REP-ETHERLINK_II-1DA-PL, Руководство пользователя

Страница: 17 / 106

ETHERLINK II - Repeater Manual
Page 17 of 106
3.4 IP-67 devices
The device represent a silumin or plastic housing containing the basic elements of the device.
The housing design corresponds to the IP-67 class (in accordance with IEC-60529). The
housing has two or three (for the plastic housing) cable inputs with stub cables for the
connection to xDSL lines, as well as two hermetic RJ-45 connectors, an M4 grounding bolt and
a LED for the silumin housing.
The regenerators in the silumin housing contain the following connectors and LEDs:
Table 3.2 Connectors and LEDs of simulin-housing regenerators.
Element Description
“STATUS”
A LED
Ethernet A hermetic RJ45 connector for the connection of Ethernet
Monitor/TLM A hermetic RJ45 connector for the connection to the control terminal or
to the dry loop
M4 bolt A grounding bolt
xDSL 1 1 and/or 3 A cable of the first and/or third xDSL line
xDSL 2 2 and/or 4 A cable of the second and/or fourth xDSL line
The regenerators in the plastic housing contain the following connectors and LEDs:
Table 3.3 Connectors and LEDs of plastic-housing regenerators.
Element Description
DSL1 A LED showing the status of the first line
DSL2 A LED showing the status of the second line (for two-channel
regenerators)
Eth A LED showing the status of the Ethernet port
G703 (above) A LED showing the status of the first E1 port
G703 (below) A LED showing the status of the second E1 port
A A hermetic RJ45 connector for the connection to the control terminal or
to the dry loop
B A hermetic RJ45 connector for the connection of Ethernet
Powering
Grounding
Output of the power cable (for locally powered devices) and
Grounding cable
xDSL 1 1 and/or 3 A cable of the first and/or third xDSL line
xDSL 2 2 and/or 4 A cable of the second and/or fourth xDSL line