ETHERLINK II - Repeater
Manual
Page 59 of 106
4.6.3.6 <NETSTAT> command
The <NETSTAT> command displays statistics of LAN (Ethernet), WAN1
– WAN4 and INT
(internal management port) interfaces.
CO_PM>NETSTAT
--------------------------------------------------------------------------------
Statistics : LAN INT WAN1 WAN2
--------------------------------------------------------------------------------
Bytes sent : 0 504k 517k 113k
Packets sent : 0 1490 1490 1109
HP packets sent : 1490 0
LP packets sent : 0 1109
HP queue overloads : 0 0
LP queue overloads : 0 0
Transmitting errors : 0 0 0
Bytes received : 0 302k 467k 123k
Packets received : 0 2746 0 0
Receiving errors : 0 0 0
--------------------------------------------------------------------------------
RR_01_PM>
LAN
– Ethernet port.
WAN1
– WAN4 – WAN1, WAN2, WAN3 and WAN4 ports, respectively.
Int
– internal port of management and monitoring (telnet, web, snmp, ping).
Bytes sent
– the number of transmitted bytes.
Packets sent
– the number of transmitted packets.
HP packets sent
– the number of transmitted high priority packets.
HP queue overloads
– the number of overloads in the queue of high-priority packets.
LP packets sent
– the number of transmitted low-priority packets.
LP queue overloads
– the number of overloads in the queue of low-priority packets.
Transmitting errors
– the number of transmitting errors. The possible reasons of transmitting
errors: 1) Excessive collisions error; 2) Excessive deferral error; 3) Transmit FIFO
underrun.
Bytes received
– the number of received bytes.
Packets received
– the number of received packets.
Test packets rcvd (received)
– the number of received test packets.
Receiving errors
– the number of receiving errors. Possible reasons of receiving errors: 1)
Frame Alignment Error; 2) CRC Error; 3) Receive FIFO overrun.
4.6.3.7 <RESETNETSTAT> command
The <RESETNETSTAT> command clears counters used to display statistics on data
transmission via interfaces.
4.6.3.8 <M> command
After the
<M>
command is entered the device displays the main menu.
4.6.3.9 <H> command
After the
<H>
command is entered the device displays the help menu.
Содержание SA-REP-ETHERLINK_II-1DA-PL
