DT Etherlink IV
User Manual
- 9 -
2
PRECAUTION
The present document describes devices of the S-Access Etherlink_IV NTU family. The document
contains the technical description of the devices, installation, configuration, and operation
instructions. Appendices and installation manuals containing additional information about the system
are also an integral part of the present document.
WARNING
BEFORE STARTING OPERATING THE EQUIPMENT, READ CAREFULLY
THE CURRENT MANUAL AND THE INSTALLATION MANUAL. S-ACCESS
GMBH REFUSES NEITHER TAKING ANY RESPONSIBILITY NOR
GRANTING ANY WARRANTY TO ANY DEVICE MALFUNCTIONING OR
ANY DAMAGES DUE TO FAILURE TO COMPLY WITH THE
REQUIREMENTS STATED IN THE MANUALS, ESPECIALLY IN THE
SECTION RELATED TO “SERVICE INSTRUCTIONS”.
WARNING
IMPROPER USE OF OUR EQUIPMENT, USE IN ANY OTHER
ENVIRONMENT OR IMPROPER INSTALLATION AND MAINTENANCE
MIGHT LEAD TO HARMFUL CONDITIONS. FAILURE TO FOLLOW THESE
PRECAUTIONS MAY RESULT IN DEATH; SEVERE INJURY OR
PROPERTY DAMAGE.
S-ACCESS GMBH REFUSES NEITHER TAKING ANY RESPONSIBILITY
NOR GRANTING ANY WARRANTY IN SUCH CASE.
WARNING
ELECTRONIC MODULES CAN BE DAMAGED OR DECREASED IN
RELIABILITY
BY
STATIC
ELECTRICAL
DISCHARGE.
BEFORE
HANDLING MODULES, WEAR AN ANTISTATIC DISCHARGE WRIST
STRAP TO PREVENT DAMAGE TO ELECTRONIC COMPONENTS.
PLACE MODULES IN ANTISTATIC PACKING MATERIAL WHEN
TRANSPORTING OR STORING. WHEN WORKING ON MODULES,
ALWAYS PLACE THEM ON AN APPROVED ANTISTATIC MAT THAT IS
ELECTRICALLY GROUNDED. TO PREVENT ELECTRICAL SHOCK, DO
NOT INSTALL EQUIPMENT IN A WET LOCATION OR DURING A
LIGHTNING STORM.
WARNING
SOME MODULES CAN BE CONFIGURED TO HAVE REMOTE POWER.
THIS MEANS, THAT THERE COULD BE A HIGH VOLTAGE ACCORDING
TO EN 60950-1 SAFETY REGULATION. BE CAREFUL AND DO NOT
TOUCH ANY COMPONENTS OF ANY MODULE. ALSO IN NOT
POWERED STATUS, SOME CAPACITORS MAY STILL CARRY A HIGH
VOLTAGE. PLEASE DO NOT TOUCH INSIDE OF ANY HOUSING.
