DT Etherlink IV
User Manual
- 67 -
Table 4.4 All possible configurations of independent channels
The main operation modes of any device are:
Independent channels (CO, СP, CX)
Independent ch
annels with reservation (CO, СP, CX)
Multipair mode (CO,
СP, CX)
Two-pair mode with reservation (available only in the four-
channel version) (CO, СP, CX)
The CONFIG table for the mode with independent channels is presented above. Typical
configurations for other modes are presented below.
Presentation of CONFIG table in
“independent channels with reservation” mode. In this
configuration, channels 1, 2, 3 are combined for reservation (CO, CP, CX).
CO_CM>CONFIG
--------------------------------------------------------------------------
Running Line Configuration
--------------------------------------------------------------------------
SHDSL DSL1 DSL2 DSL3 DSL4
Mode : Slave(HTU-R) Slave(HTU-R) Slave(HTU-R) Slave(HTU-R)
Extended rates: OFF OFF OFF OFF
Line coding : AUTO AUTO AUTO AUTO
Baserate : AUTO AUTO AUTO AUTO
Annex : A/B A/B A/B A/B
Payload : E1-1,WAN E1-2,WAN E1-3,WAN E1-4,WAN
Clock source : E1-1,Int E1-2,Int E1-3,Int E1-4,Int
Reserve : {=========== Reserve group A ===========} ---
Power : OFF OFF OFF OFF
GS compatible : OFF
E1 E1-1 E1-2 E1-3 E1-4
G.704 framing : OFF OFF OFF OFF
CRC4 : N/A N/A N/A N/A
AIS Detection : ON ON ON ON
AIS Generation: ON ON ON ON
E1 clock : DSL DSL DSL DSL
TS into DSL : 0-31 0-31 0-31 0-31
TS into WAN : NONE NONE NONE NONE
--------------------------------------------------------------------------------
CP_CM>
Presentation of CONFIG table in
“independent channels with reservation” mode. In this
configuration, channels 1, 2 and 3, 4 are combined for reservation (CO, CP, CX).
CO_CM>CONFIG
--------------------------------------------------------------------------
Running Line Configuration
--------------------------------------------------------------------------
SHDSL DSL1 DSL2 DSL3 DSL4
Mode : Master(HTU-C) Master(HTU-C) Master(HTU-R) Master(HTU-C)
Extended rates: OFF OFF OFF OFF
Line coding : PAM32 PAM32 PAM32 PAM32
Annex : A/B A/B A/B A/B
Payload : E1-1,WAN E1-2,WAN E1-3,WAN E1-4,WAN
Clock source : E1-1,Int E1-2,Int E1-3,Int E1-4,Int
Reserve : {==== Reserve group A ====} {==== Reserve group B ====}
Power : OFF OFF OFF OFF
GS compatible : OFF
E1 E1-1 E1-2 E1-3 E1-4
G.704 framing : OFF OFF OFF OFF
CRC4 : N/A N/A N/A N/A
AIS Detection : ON ON ON ON
AIS Generation: ON ON ON ON
E1 clock : DSL DSL DSL DSL
TS into DSL : 0-31 0-31 0-31 0-31
TS into WAN : NONE NONE NONE NONE
--------------------------------------------------------------------------
CO_CM>
