Page 17 — English
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
WARNING:
Never fell a tree or cut a log or limb that has a
diameter greater that the length of the guide
bar. Only properly trained professionals should
perform these cuts. Performing these types of
cuts can cause an accident and result in death
or serious personal injury.
NOTICE:
Before each use, inspect the entire product
for damaged, missing, or loose parts such as
screws, nuts, bolts, caps, etc. Tighten securely
all fasteners and caps and do not operate this
product until all missing or damaged parts are
replaced. Please contact customer service or a
qualified service center for assistance.
APPLICATIONS
You may use this product for the purposes listed
below:
Basic limbing, felling, and woodcutting
Removing buttress roots
ADDING BAR AND CHAIN LUBRICANT
See Figure 7.
NOTE:
Chain saw comes from the factory with
no bar and chain lubricant added. Level should
also be checked after every 20 minutes of use and
refilled as needed.
Use a bar and chain lubricant designed for lubri-
cating chain saw chains. They are formulated to
extend bar and chain life by protecting against
wear and reducing friction and heat.
NOTE:
Do not use dirty, used, or otherwise con-
taminated lubricants. Damage may occur to the
bar or chain.
Remove oil cap.
Carefully pour the bar and chain lubricant into
the tank.
Wipe off excess lubricant.
Check and fill the oil tank when quick view oil
indicator is below the second to last indicator
line.
Repeat as needed.
N
OTE:
It is normal for lubricant to seep from the
saw when not in use. To prevent seepage, empty
the oil tank after each use then run for one minute.
When storing the unit for a long period of time
(three months or longer) be sure the chain is lightly
lubricated; this will prevent rust on the chain and
bar sprocket.
Fig. 7
QUICK VIEW
OIL INDICATOR
OIL RESERVOIR
CAP
OPERATION
CHAIN
LUBRICANT