7
replace and tighten the chain lubricant cap.
■
Always fit guide bar cover before storing the product, or
during transportation.
■
Store the product in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-
icing salts. Do not store outdoors.
■
When carrying the product for a short distance (from
one working area to the next), always apply the chain
brake so that the saw chain is restricted from movement.
■
When transporting the product, secure it against
movement or falling to prevent injury to persons or
damage to the product.
■
Never carry or transport the product while the engine
is running.
■
Abide by all government and local regulations for the
safe storage and handling of petrol. Excess fuel should
be used in other 2-cycle engine powered equipment.
MAINTENANCE
Always keep the product in good working condition.
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For servicing and repairs, have the product
serviced by an authorised service centre only. When
servicing, use only original replacement parts.
WARNING
Before inspecting, cleaning, or servicing the product,
stop the engine and engage the chain brake. Failure to
follow these instructions can result in serious personal
injury or property damage.
■
You may only make adjustments or repairs described
in this manual. For other repairs, contact the authorised
service centre.
■
Consequences of improper maintenance, removal, or
modification of safety features like the chain brake,
ignition switch, hand guard (front and back), spiked
bumper, chain catcher, guide bar, low kick-back saw
chain may cause the safety features to not function
correctly, thus increasing the potential for serious injury.
Keep the product professionally maintained and safe.
■
Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available at your
authorised service centre. The part number is available
in the product specification table in this manual.
■
Follow instructions for lubricating and chain tension
checking and adjustment.
■
After each use, clean the product with a soft dry cloth.
■
Check all nuts, bolts, and screws at frequent intervals
for security to ensure the product is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
WARNING
Never run the engine without the air filter. Make sure the
air filter is correctly placed in the air filter cover before
reassembly.
INSPECTING AND CLEANING THE CHAIN BRAKE
See page 31.
■
Always keep the chain brake mechanism clean by
lightly brushing the linkage free from dirt.
■
Always test the chain brake performance after cleaning.
■
Refer to “Operation - Checking and Operating Chain
Brake” section in this manual for additional information.
ENGINE SPEED AND CARBURETTOR ADJUSTMENT
WARNING
Incorrect carburettor adjustment may increase the risk
of injuries, fatal accidents, or product damage. For
carburettor adjustment, have the product serviced by an
authorised service centre only.
MAINTENANCE SCHEDULE
Daily check
Fuel mixture
Before each use
Bar lubrication
Before each use
Chain tension
Before each use
and frequently
Clutch engagement
(no chain movement at idling
speed)
Before each use
Chain sharpness
Before each use,
visual check
For damaged parts
Before each use
For loose fasteners
Before each use
For loose parts
Before each use
Chain brake function
Before each use
For fuel leaks
Before each use
INSPECT AND CLEAN:
Bar
Before each use
Complete saw
After each use
Air filter
Every 5 hours*
Содержание RCS3845
Страница 1: ...ORIGINAL INSTRUCTIONS Petrol Chainsaw RCS3845...
Страница 13: ...11...
Страница 14: ...12 WHAT S IN THE BOX x 1 x 1 x 1 x 1 x 1 x 1 RCS3845...
Страница 18: ...16...