SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician.
For service we suggest you return the product to your
nearest AUTHORISED SERVICE CENTRE for repair.
When servicing, use only identical replacement parts.
WARNING
Observe all normal safety precautions related to
avoiding electrical shock.
WARNING
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
Save this operator's manual and review
frequently for continuing safe operation and
instructing others who may use this product.
WARNING
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which can result in severe eye damage.
Before beginning power tool operation, always
wear safety goggles or safety glasses with side
shields and a full face shield when needed.
We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with
side shields. Always use eye protection.
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS
RBV-2200
Voltage
220-240V~ 50 Hz
Power 2,200
W
Air velocity
237 Km/h
Air volume
16 cbm/min
Mulching ratio
10:1
Dust bag capacity
45 L
Measured sound power level
101 dB (A)
Guaranteed sound power level
107 dB (A)
Vibration level
< 25 m/s
2
RBV-2400VP
Voltage
220-240V~ 50 Hz
Power 2,400
W
Air velocity
185~237 Km/h
Air volume
10~16 cbm/min
Mulching ratio
10:1
Dust bag capacity
45 L
Measured sound power level
97 dB (A)
Guaranteed sound power level
107 dB (A)
Vibration level
< 25 m/s
2
DESCRIPTION
1. Shoulder
Strap
2. Rear
Handle
3. On/Off
Switch
4. Speed Control Dial (Model RBV-2400VP only)
5. Front
Handle
6. Motor
Housing
7. Nozzle
8. Guide
Wheels
9. Patio Head (Model RBV-2400VP only)
10. Dust Bag
11. Blower / Vac Mode Selection Lever
12. Power Cable & Plug
13. Live Tool Indicator
14. Dust Bag Holder
ASSEMBLY
ATTACHING THE NOZZLE (Fig.2)
■
The nozzle (7) comes in two sections. Assemble the
sections by slotting them together as shown in Fig. 2.
Ensure the sections have clicked into place and are
aligned properly. Fasten the sections together at the
top and at the bottom, with screws provided.
■
Slide the assembled nozzle into the motor housing
(6). With the latches at the top and at the bottom,
lock the nozzle in place.
ATTACHING AND REMOVING THE DUST BAG
(10) (Fig.3 & 4)
CAUTION
Do not use the Blower/Vac in the vacuum mode
without the dust bag (10) in place.
■
Latch the front of the dust bag holder (14) to the front
of the dust exhaust and then lift the dust bag handle
side until the dust bag holder secures to the housing.
See Fig. 3.
■
Hang the strap at the front of the dust bag to the
bottom of the nozzle. See Fig. 4.
■
When removing the dust bag, detach the strap from
nozzle first, then press the release on the dust bag
holder and gently dislodge the dust bag off the motor
housing.
SHOULDER STRAP (1) (Fig.3)
■
Attach the metal fixture of the shoulder strap to the
hole just in front of the ON/OFF switch.
10
English
GB
F
D
E
I
P
NL
S
DK
N
FIN GR
HU
CZ
RU
RO
PL SLO HR
TR EST
LT
LV
SK
BG
RBV-2200_25 lgs 13/09/06 9:20 Page 10