SYMBOLS
N197
Important:
Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOLS
NAME
EXPLANATION
Safety Alert Symbol
Indicates danger, warning or caution. it means attention!!!
Your safety is involved.
Read Your Operator's Manual
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satification and safe use.
Wear eye, hearing
Wear eye, hearing and head protection when operating this
and head protection
equipment.
Keep bystanders away
Keep all bystanders at least 15m (50 ft) away.
Ricochet
Danger of Ricochet.
Tri-Arc blade
Tri-Arc blade is appropriate for this unit and is suited for cutting
pulpy weeds and vines.
Do not use toothed blade
This unit is not intended for use with a toothed saw type blade.
RPM Decal
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Boots
Wear non-slip safety footwear when using this equipment.
Gloves
Wear non-slip, heavy-duty gloves.
No Smoking
Do not smoke when mixing fuel or filling fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an
octane rarting of 87([R+M]/) or higher.
Lubricant
Use -stroke lubricant for air cooled engines.
Mix Petrol and Lubricant
Mix the fuel mix thoroughly and also each time before refuelling.
Switch
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
