manualshive.com logo in svg
background image

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

18 VOLT OSCILLATING  

MULTI-TOOL

OSCILLANT OUTIL  

POLYVALENT 18 V
OSCILANTE  

MULTI-HERRAMIENTAS 18 V

PBLMT50

WARNING:

 

To reduce the risk 

of injury, the user must read and un-

derstand the operator’s manual before 

using this product.

SAVE THIS MANUAL FOR 

FUTURE REFERENCE

ADVERTENCIA:

 

Para reducir 

el riesgo de lesiones, el usuario debe 
leer y comprender el manual del 
operador antes de usar este producto. 

AV E RT I S S E M E N T   : 

Pour réduire les risques de blessures, 

l’utilisateur doit lire et veiller à bien 

comprendre le manuel d’utilisation avant 

d’employer ce produit.  

GUARDE ESTE MANUAL 

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL 

POUR FUTURE RÉFÉRENCE

TABLE OF CONTENTS

****************

 General Power Tool  

Safety Warnings ..............................2-3

 Multi-Tool Safety Warnings .............3-4

 

Symbols ...........................................4-5

 

Features .............................................. 5



 Assembly ............................................ 5

 Operation .........................................6-8

 Maintenance ....................................... 8

 

Troubleshooting .................................. 8

 Illustrations ......................................... 9

 Parts Ordering  

and Service ......................... Back page

TABLE DES MATIÈRES

****************

 Avertissements de sécurité générales 

relatives aux outils électriques ........ 2-3

 Avertissements de sécurité relatifs au 

outil polyvalent ....................................4

 

Symboles .............................................5

 

Caractéristiques ..................................5



 Assemblage .........................................6

 Utilisation  ........................................ 6-8

 Entretien  .............................................8

 

Dépannage ..........................................8

 Illustrations ..........................................9

 Commande de pièces  

et dépannage .................... Page arrière

ÍNDICE DE CONTENIDO

****************

 Advertencias de seguridad para 

herramientas eléctrica .................... 2-3

 Advertencias de seguridad para  

multi-herramientas ..............................4



 

Símbolos .............................................5

 

Características ....................................5



 Armado ................................................6

 Funcionamiento ............................... 6-8

 Maintenimiento  ...................................8

 

Corrección de problemas ....................8

 Illustraciones .......................................9



 Pedidos de piezas  

y servicio ........................ Pág. posterior

Содержание PBLMT50





























Отзывы: