background image

3

GENERAL SAfETY RULES

WARNiNG!

 

READ  AND  UNDERSTAND  ALL  iNSTRUCTiONS.   

Failure to follow all instructions listed below, may result in 
electric shock, fire and/or serious personal injury.

 

SAvE THESE iNSTRUCTiONS
WORk AREA

 

keep  your  work  area  clean  and  well  lit. 

Cluttered 

benches and dark areas invite accidents.

 

keep  bystanders,  children,  and  visitors  away  while 
operating an inflator. 

Distractions can cause you to lose 

control.

 

Operate inflator in an open area at least 18 in. away 
from any wall or object that could restrict the flow of 
fresh air to ventilation openings.

ELECTRiCAL SAfETY

 

A  battery  operated  tool  with  integral  batteries  or  a 
separate battery pack must be recharged only with 
the specified charger for the battery. 

A charger that 

may be suitable for one type of battery may create a risk 
of fire when used with another battery.

 

Use  battery  operated  inflator  only  with  specifically 
designated battery pack. 

Use of any other batteries may 

create a risk of fire.

 

 

Use battery only with charger listed.

 MODEL   

BATTERY PACk (P100)   CHARGER (P110)

   

P730 

130255004 

1423701, 140237021

     

or 130224028 

or 140237023

PERSONAL SAfETY

 

Stay  alert,  watch  what  you  are  doing  and  use 
common sense when operating an inflator. Do not use 
inflator while tired or  under the influence of  drugs, 
alcohol, or medication.

 A moment of inattention while 

operating inflator may result in serious personal injury.

 

Dress properly. Do not wear loose clothing or jewelry. 
Contain long hair. keep your hair, clothing, and gloves 
away from moving parts. 

Loose clothes, jewelry, or long 

hair can be caught in moving parts.

 

Avoid  accidental  starting.  Be  sure  switch  is  in  the 
locked or off position before inserting battery pack. 

Carrying inflators with your finger on the switch or insert-
ing the battery pack into an inflator with the switch on 
invites accidents.

 

Do not overreach. keep proper footing and balance 
at all times. 

Proper footing and balance enable better 

control of the inflator in unexpected situations.

 

Use safety equipment. Always wear eye protection.

 

Dust mask, non-skid safety shoes, hard hat, or hearing 
protection must be used for appropriate conditions.

 

Eye  protection  is  required  to  guard  against  flying 
fasteners and debris which could cause severe eye 
injury.

 

Do not wear loose clothing or jewelry. Contain long 
hair. 

Loose clothes, jewelry, or long hair can be drawn 

into air vents.

 

Do not use on a ladder or unstable support. 

Stable 

footing on a solid surface enables better control of the 
inflator in unexpected situations.

TOOL USE AND CARE

 

Do not force the tool. Use the correct tool for your 
application. 

The correct tool will do the job better and 

safer at the rate for which it is designed.

 

Check hoses for weak or worn condition before each 
use, making certain all connections are secure. 

Do not 

use if defect is found. Purchase a new hose or notify an 
authorized service center for examination or repair.

 

Release all pressures within the system slowly. 

Dust 

and debris may be harmful.

 

Do not use inflator if switch does not turn it on or off. 

An inflator that cannot be controlled with the switch is 
dangerous and must be repaired.

 

Disconnect  battery  pack  from  inflator  or  place  the 
switch  in  the  locked  or  off  position  before  making 
any  adjustments,  changing  accessories,  or  storing 
the inflator.

 Such preventive safety measures reduce the 

risk of starting the inflator accidentally.

 

Store idle inflators out of reach of children and other 
untrained persons. 

Inflators are dangerous in the hands 

of untrained users.

 

When battery pack is not in use, keep it away from 
other metal objects like: paper clips, coins, keys, nails, 
screws, or other small metal objects that can make 
a connection from one terminal to another.

 Shorting 

the battery terminals together may cause sparks, burns, 
or a fire.

 

Check for misalignment or binding of moving parts, 

breakage of parts, and any other condition that may 

affect the inflator’s operation. if damaged, have the 

inflator  serviced  before  using. 

Many  accidents  are 

caused by poorly maintained tools.

 

Use only accessories that are recommended by the 
manufacturer for your model.

 Accessories that may be 

suitable for one inflator may create a risk of injury when 
used on another inflator.

 

keep the inflator and its handle dry, clean and free 

from  oil  and  grease. 

Always  use  a  clean  cloth  when 

cleaning.  Never  use  brake  fluids,  gasoline,  petroleum-

based  products,  or  any  strong  solvents  to  clean  your 

inflator. Following this rule will reduce the risk of loss of 
control and deterioration of the enclosure plastic.

 

Содержание P730

















Отзывы: