5 — English
LED FUNCTION OF CHARGER
See Figures 1 and 6, pages 7 - 9.
There are two sets of green and red LEDs. The green and red LEDs closest to the 40V battery port will indicate the status of a 40V
battery pack and the LEDs closest to the 18V battery port will indicate the status of an 18V battery pack.
OPERATION
MODE
BATTERY PACK
GREEN LED
RED LED
ACTION
POWER
Without battery
pack
OFF
ON
Ready to charge battery pack.
EVALUATE
Hot battery pack
OFF
Flashing
When battery pack reaches cooled temperature, char-
ger begins charge mode.
Cold battery pack
When battery pack reaches warmed temperature,
charger begins charge mode.
Deeply discharged
Charger pre-charges battery until normal voltage is
reached, then begins charge mode.
ERROR
Pack inserted
OFF
Fading
Battery pack or charger error.
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for instructions).
• If a different battery also indicates
Error
, the charger should be replaced.
CHARGING
Pack inserted
Flashing
ON
Charging
FULLY
CHARGED
Pack inserted
ON
OFF
Charging complete
STANDBY
MODE
Pack inserted
Fading
OFF
Battery pack is fully charged and charger is in standby
mode.
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 7.
