background image

1

Safety, performance, and dependability have been given 

top priority in the design of your cordless lopper.

INTENDED USE

The cordless lopper is intended for outdoor use only. For 

safety reasons, the product must be adequately controlled 

by using two-handed operation.
The product is designed for cutting and pruning small limbs 
and branches. Do not use the product for cutting non-wood 
items. The product is intended to use for cutting branches 

with a diameter of up to 32 mm (softwood) and 28 mm 

(hardwood). Do not cut thick branches which diameter are 

thicker than these values. 

The product has a fixed length of 0.85m.

The product should not to be used by children or by persons 

not wearing adequate personal protective equipment and 

clothing. Do not use the product for any other purpose.

GENERAL POWER TOOL SAFETY WARNINGS 

 

 WARNING

Read all safety warnings instructions, illustrations, 

and specifications provided with this power tool.

 

Failure to follow all instructions listed below may result in 

electric shock, fire, and/or serious injury. 

Save all warnings and instruction for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool.

WORK AREA SAFETY

 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

 

Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

 

Keep children and bystanders away while operating 

a power tool.

 Distractions can cause you to lose 

control.

PERSONAL SAFETY

 

Stay alert, watch what you are doing and use 

common sense when operating a power tool.

 

Do 

not use a power tool while you are tired or under the 

influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 

serious personal injury.

 

Use personal protective equipment.

 

Always wear 

eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injury.

 

Prevent unintentional starting.

 

Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch 

on invites accidents.

 

Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to 

a rotating part of the power tool may result in personal 

injury.

 

Do not overreach.

 

Keep proper footing and balance 

at all times. 

This enables better control of the power in 

unexpected situations.

 

Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts. 

Loose clothes, jewellery or long 

hair can be caught in moving parts.

 

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

POWER TOOL USE AND CARE

 

Do not force the power tool.

 

Use the correct power 

tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was 

designed. 

 

Do not use the power tool if the switch does not turn 

it on and off. 

Any power tool that cannot be controlled 

with switch is dangerous and must be repaired.

 

Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

 

Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained 

users.

 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s 

operation. If damaged, have the power tool repaired 

before use. 

Many accidents are caused by poorly 

maintained power tools.

 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

 

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to 

be performed. 

Use of the power tool for operations 

different from those intended could result in a 

hazardous situation.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

 

Use power tools only with specifically designated 

battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

Содержание OLP1832B



























Отзывы: