Ryf AG Ash INSPEX II, Руководство пользователя

Страница: 8 / 42

Inspex II User Manual
8 | P a g e INSPEX II English Rev 1.06, SW Rev 1.06
Installation:
Setup:
1. Attach the Arm Receiver to the Stand Focus block using the 4 screws provided (Fig. 2).
2. Hook the Arm Bracket onto the Arm Receiver using the 4 hooks. Tighten the two thumb screws
at the rear of the Arm Receiver.
Cabling (Fig. 2a)
3a. Route all cables, such as power supply, External Keypad cables and ESD cables, through the hole
of the underside of the Arm Bracket and ground the ESD cable to bench. Route the HDMI cable to the
monitor. Insert the mouse dongle and keyboard dongle into the side ports on the INSPEX II.
Note: The
mouse dongle must be plugged in before powering the INSPEX II unit on. This will enable the mouse
to be detected,
3b. Connect the cables to their corresponding ports on the INSPEX II.
4. Hook the INSPEX II onto the front hooks on the Arm Receiver using the 4 hooks.
5. Tighten the front two thumb screws on the Arm Receiver to secure the INSPEX II.
Cables feed through
hole in the Arm Bracket
5
1
2
4
Fig 2.
Fig 2a.
Never look directly at the LED light source for any prolonged period of time.