Inspex II User Manual
24 |
P a g e
INSPEX II English Rev 1.06, SW Rev 1.06
Alternative Method of Creating Overlays Using An Image Editor
•
Create a new image 1920 pixels wide and 1080 pixels high in your image editor application.
•
Flood-fill the image with 0xFFAEC9 color in RGB format.
•
Draw the Overlay lines required in any scale or colour
(*except 0xFFAEC9).
•
Make a note of the mm/pixel ratio by selecting a line/distance that has a known length in
mm.
•
Count the number of pixels of this line.
•
The mm to pixel ratio is the length in mm divided by number of pixels.
Rename the .bmp file to
.ash
which is the standard format for all Ash measurement and overlay files.
•
Copy the file to a USB memory stick.
•
Insert the USB Key into the INSPEX II and click on the Overlay icon.
•
Select USB Key
from the ‘Look In’
drop down menu on the INSPEX II system.
•
Browse to the Overlay .ash file.
•
Select the file or right-click to copy and paste to the Internal Storage
–
then select.
•
You will be prompted to select the mm/pixel ratio. If unknown, then adjust the zoom until
the overlay aligns with your part.
•
Click save.
Save Merged Overlay Image
When an Overlay/Preset has been loaded,
it’s possible to add additi
onal measurements or
annotation. Save this detail as a Merged Overlay Image (Fig.10) for reference, or alternatively save
an observation. It can only be exported as an image .jpg/.bmp and
not
as an .ash file. This is to
prevent the Overlay/Preset from being accidently overwritten.
Fig. 12
Содержание Ash INSPEX II
Страница 1: ......
Страница 18: ...Inspex II User Manual 18 P a g e INSPEX II English Rev 1 06 SW Rev 1 06 Users Continued Fig 8a User details...
Страница 42: ......
