NVR Quick Start
6.4 Manual Capture
Right click to bring main menu, click
【
Capture
】
, it supports all
channels manual capturing. After capture, there is information to hint
capturing is successful or failure or this channel does not support capture.
The image of capture resolution is D1 by JPG
Format, and it is saved in special area, the recording file will not overlay it.
The capture
Image can be viewed or backup in file manage folder
Right click to bring main menu, click
【
File Manager
】
and click Refresh button,
The captured file shows in the file list area, the file are named by channel number& capture time,
Double click it to check.
Capture back up:
plug flash disk by USB port, click Refresh to check whether flash disk connect
well, then select the capture files that need back up, and click Back Up to begin it.
6.5 System Setting
6.5.1 Device Parameter
Click
【
Setting
】
Device
Device
info to check device spec., information and
time setting
Notice:
Attention: select mode according the
connected IP camera channels and resolution,
after change the model,click save and reboot
the device.
When the image is good in 9/16/25/26 screen
modes, after double click the image to zoom,
the image is stuck or become black screen
change to 1080 mode can solve it.
Systerm version:
check the system version and time, when do software update, need to check
version first to avoid updating failure and
damage the device.
6.5.2 Channel Information
Click
【
Setting
】
Channel
Video
Parameters, to adjust IP camera preview and
recording resolution.
1)
Encoding Type:
Main Stream (Normal), Sub
8/ 17