NVR Quick Start
8.1 IE Viewing.
8.1.1 Router Setting
Because the router brands and models are various , now we take TP-LINK router as an example.
1
）
Open the IE explore , enter the Gateway in the address, eg:
http://192.168.1.1
2) In the open page ,enter the user name and password , the default user name of TP-Link
is :admin , password is admin.
3
）
Click the “Forward rule” in the left side tool option, in some router called “mapping port “.
Click “Virtual server”, click “add new”
Manually enter the port and click save.
The port in Forwarding rule is same as the “device port and HTTP port “ in the NVR setting.
Take P5 6.1 network setting as example , it is 5050-5053,80
Finish the adding , click “ enable all the rule”
Take 3322 as example , the Domain is
www.3322.org
, go to 3322 , enter the information and
remember the domain which you have successfully registered.
Att:the domain, user name and password need to put in the DDNS Setting in DVR/NVR.
Back to the IE explore and enter the domain, and add the colon +http port
8.1.2 User Login
1
）
Enter the colon+Http port . or enter the static IP +colon +http port .
2
）
You can download and install IE ActiveX from NVR through the Internet. Then input
IP address of the NVR in the IE browser, port number: 5050, user name and
Password, then the below interface will pop-up:
8.1.3 IE Operation
The operation of IE is same as in the local NVR.
Remark: open the preview, click the right bottom to let it change to or right click to
Open All
, the
red point represent recording , and click to set the stream and switch of main stream and sub stream.
13/ 17
