NVR Quick Start
Stream, Main Stream (Event) for selection
Main Stream
:
double click to show single image or full screens image are main stream, also
recording playback is main stream.
Sub Stream
:
9/16/25/36 screens display are using sub stream, IE or mobile reviewing are sub
stream also.
Main Stream (Event)
:
motion detection and alarm trigger recording are using this
2)
Stream Type
:
video, video & audio two type for selection. When connect with audio, please
select video & audio mode, or there is no audio when playback.
3)
Resolution
:
NVR will get IP camera main stream and sub stream resolution automatically,
when the image is not good, can adjust from here according to necessory.
4)
Bitrate Type
:
set variable bit rate and constant bit rate
5
)
Bitrate:
set the bit rate upper limit for coding main stream are 1080P: 6000kbps, 720P:
4000kbps ; set the bit rate upper limit for coding sub stream is 512-1024kbps
6
)
Frame Rate
:
suggest to set full frame 25/30
7
)
Video Quality:
suggest to select highest
When all the IP cameras connected with NVR are same brand, after finish setting 1
st
channel, can
click
Copy To
to apply the setting to all channels, then click
Save
.
7.1 Recording
7.1.1 Manual Recording
Right click to bring main menu, click
【
Record
】
to enter record
setting.
Manual recording has the highest priority, after performing
Manual
,
the corresponding channel will begin recording.
9/ 17