ryan LAWNAIRE 28 544874F, Руководство оператора

Страница: 23 / 26

21
Lawnaire
28
REVERSING GEAR BOX REMOVAL
1. Remove the shield covering the aerator
mechanism.
2. Remove the return links A connecting the tine
arms C to the vertical links B by unscrewing the
hardware and separating the two halves. Note
the position of the washers for reinstallation.
3. Remove the four (4) screws D holding the
reversing gear box to the mounting plate and
remove the reversing gear box with the vertical
links still attached.
4. Loosen the two (2) screws E securing the vertical
link to the reversing gear box shaft. Remove the
vertical link by sliding it off of the shaft
REVERSING GEAR BOX INSTALLATION
5. When work on the reversing gear box is
complete, reinstall by reversing the preceding
procedure.
When reassembled, the tine arms should be
vertical side-to-side. If they are not, loosen the
set screws in the crankshaft bearing lock collar
F
and slide the bearing in or out on the shaft until
the tine arm is vertical.
6. Rotate the crankshaft by hand to make sure the
tine arms do not bind.
SERVICE