RVS 7709910, Инструкция по эксплуатации

Страница: 6 / 14

Wiring Camera & Monitor
• Audio:There is audio on
channels 2 and 3. On channel 3
the blue trigger wire must be
energized (12V) to activate the
audio. On channel 2 the audio
is always on.
• Grid-lines:The grid-lines are
also carried through the blue
wire. To use the grid-lines for
reversing, connect the blue
wire to a reverse power.
Note: The camera and monitor can
always be activated by manually
pushing the power button on monitor.
This is in addition to utilizing the
positive triggers.
• There is a built-in voltage
regulator for our systems which
can handle 12-24 volts. Real
consumption is 10 to 30 Volts.
Note: If connecting power
directly to battery, the camera
is always ON and therefore can
drain battery. Therefore it is
recommended to connect
power to an ignition switched
accessory power source.
NOTE: This guide references backup cameras. These cameras are sold separately.
6