RVS 7709910, Инструкция по эксплуатации

Страница: 3 / 14

Before Beginning Installation
Before drilling please check that no cable or wiring is on the
other side of the wall. Please clamp all wires securely to reduce
the possibility of them being damaged while vehicle is in use.
Keep all cables away from hot or moving parts and electrical
noisy components.
We recommend doing a benchmark test before installation to
insure that all components are working properly.
Step 1: Choose the monitor location.
Step 2: Install all cables in vehicle, when necessary a
0.8 " (20mm) hole should be drilled for passing camera cable
through vehicles walls. Install split grommets where applicable.
Step 3: Once all cables and wiring have been properly routed,
perform a system function test by temporarily connecting the
system. If the system seems to not be operating properly see
trouble shooting (page 16).
3