RVS 7709910, Инструкция по эксплуатации

Страница: 13 / 14

Troubleshooting
Monitor Displays Blue Screen & Displays No Signal
•
Do a hard reset, unplug all
cables and power cables leave
out for 1 minute and then
re-connect them.
•
Check to ensure that the con­
nection to the camera is tight.
•
Verify camera cable is plugged
into port labeled Backup Camera
•
Verify that the blue positive
trigger on power harness is put to
power 12v+.
If the problem still persists, verify
that alternate ports work. If
alternate ports do not work,
remove Blue Trigger wire from 12V+
and select alternate chan­nels.
Monitor Will Not Power-Up (no backlight on power button)
• Check fuse • Check ground connection
•
Check 12v+ to monitor
No Image On Screen
•
Verify camera is on correct
camera input
•
Verify cable is connected to
monitor
•
Verify camera is connected to
cable
•
Connect known working
camera and cable to monitor.
• Verify Blue trigger is receiving
power
Audio On Camera
• Verify chosen camera has audio
•
Verify volume setting
• Confirm that the Blue audio
Trigger is connected to 12v+
NOTE: This guide references backup cameras. These cameras are sold separately.
13