Installation Guide
The Power Harness.
larly be triggered (i.e. side cam-
•
To power the system connect
eras can be triggered by the turn
the power(RED) 12V+wire to
signals etc.)
ignition power and the ground
•
To automatically have camera
(BLACK) wire to chassis ground. and monitor turn ON when vehi-
•
These are the only wires
needed to power the entire
system and all the cameras.
Each camera can be seen at
any time by simply pressing
the power button and using
the V 1/2 button to toggle.
•
The three positive trigger wires
(WHITE-CH1, BR0WNCH2,
BLUE-CH3) each represent one
channel and will turn on their
channel when the trigger wire
is energized with 12V.
•
"Camera 3" is the designated
backup channel. To have the
the backup camera come on
when you go into reverse, con
nect the BLUE wire to reverse
power (or any power source
that comes on only in reverse).
•
The other channels can simi-
cle activates, simply twist BLUE
positive trigger 12V+ to Red
Power line 12V+ and wire to ig
nition power.
Note:This setup will disable
the menu in channel 3. To
access the menu simply move
to channel 1 or 2 and all the
changes will apply to channel 3.
Note: When the blue wire is
active it will have precedence
over the other triggers.
Therefore, if you wish to use
multiple triggers, do not
attach the blue trigger.
NOTE: This guide references backup cameras. These cameras are sold separately.
5
Содержание 7709910
Страница 1: ...7 WATERPROOF REAR VIEW MONITOR RVS 9910 Instruction Manual VEHICLE SAFETY IT S ALL WE DO TM...
Страница 7: ...Installation Diagram Figure 1 1 Figure 1 3 Connection of U Bracket Figure 1 2 11 C t t S 7...
Страница 8: ...Installing the Monitor Camera Sold Separately 8...
Страница 11: ...Monitor Dimensions 205 50 mm CJDDDDD il s s 11...
