RVR Energy Technology MICROMAT EC 45 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 56

RVR Energy Technology MICROMAT EC 45 Скачать руководство пользователя страница 14

E n e r g y T e c h n o l o g y

Ltd.

14

13.0 flue

systems

The MICROMAT EC has an excess pressure combustion system that allows the appliance to be exhausted over
extended distances using small OD flue components.

The flue gas temperature is extremely low (typically the same as the flow water temperature), which allows the use
of easy to install PPS (polypropylene) flue pipe and fittings.

The appliance can take combustion air from the room in which it is installed (conventional application) or can be
room sealed using a concentric flue arrangement of a 70mm PPS flue duct within a 125mm galvanised metal air
duct, finished in off-white RAL 7035. A full range of flue pipe and air duct components including roof and wall
terminals is available from RVR Limited.

Flue System Option No. 1

Horizontal Balanced Flue System

Using this sytem the air for combustion and the flue products are piped
to/from outside the space.

The balanced flue may pass through the wall directly behind, or, on either
side of the MICROMAT EC.

The following components and options are available from RVR Limited:~

•70/125 concentric wall terminal set complete with flue products sampling
tee, 500mm straight concentric flue, wall sealing plates and outside terminal.
These are finished in RAL 7035 (the 125mm galvanised pipe) and light grey
(natural colour of 70mm PPS pipe). RVR Order Code - SBA050

The system may be extended using the following accessories:

•125mm Ø Extension pipe RAL7035, 250mm long. RVR Order Code - SBA053

•125mm Ø Extension pipe RAL7035, 500mm long. RVR Order Code - SBA054

•125mm Ø Extension pipe RAL7035, 1000mm long. RVR Order Code - SBA055

•125mm Ø 90

°

bend RAL7035. RVR Order Code - SBA056

•70mm Ø Extension Pipe PPS, 250 mm long. RVR Order Code - SBA057

•70mm Ø Extension Pipe PPS, 500mm long. RVR Order Code - SBA058

•70mm Ø Extension Pipe PPS, 1000mm long. RVR Order Code - SBA059

•70mm Ø 90

°

bend PPS. RVR Order Code - SBA060

•Birdscreen for 70mm Pipe. RVR Order Code - ACB002

Concentric Wall Terminal Set

Order Code SBA050

Flue Products

Sampling Tee.

MICROMAT EC

Horizontal Balanced Flue with side exit

Concentric Wall Terminal Set

Order Code SBA050.

Flue Products

Sampling Tee.

MICROMAT EC

Horizontal Balanced Flue with rear exit

«
...
12
13
14
15
16
...
»

Содержание MICROMAT EC 45

























































Отзывы:

Нет отзывов