Rutland County Empingham 6ft tool store Скачать руководство пользователя

Страница: 8 / 8

Empingham 6ft tool store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 21

Step 22

The tool store section of the store is now complete
and ready for the final stage.

The hasp is already screwed onto the front of the
door. Close the door

and hold the hasp horizontal,

then position the staple and fix into place.

Step 23

Your Empingham log and tool store is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on:

01778 440803

Email: [email protected]
www.rutlandcountygardenfurniture.co.uk

Содержание Empingham 6ft tool store









Результаты поиска

Содержание Empingham 6ft tool store

Отзывы:

Похожие инструкции для Empingham 6ft tool store

Бренды по названию

Популярные бренды

Rutland County Empingham 6ft tool store, Руководство по сборке

Результаты поиска

Содержание Empingham 6ft tool store

Отзывы:

Похожие инструкции для Empingham 6ft tool store

Бренды по названию

Популярные бренды