RUTHMANN ECOLINE RS200 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 74

RUTHMANN ECOLINE RS200 Скачать руководство пользователя страница 3

USE AND MAINTENANCE MANUAL R68090150

ORIGINALE

RUTHMANN ITALIA S.r.l. Via Santa Maria del Piano di sotto,91/B

–

47854 Montescudo-Monte Colombo (RN) - ITALIA

pag. 3

INDEX

Terms and conditions of guarantee
Manual receipt advice and declaration

1.

INTRODUCTION

1.1.    Purpose and limits of the instruction manual
1.2.    Where and how to store the instruction manual.
1.3.    Modifications and additions to the instruction manual.
1.4.    Exclusion of liability.
1.5.    Collaboration between manufacturer and user.
1.6.

Characteristic data for the composition of the “CONTROL BOOKLET” by the Regulatory Body.

1.7. Legal aspects

2.

GENERAL INSTRUCTIONS AND OPERATIONAL PRECAUTIONS

2.1.    General use instructions.
2.2.    Operational precautions (residual risks).
2.3.  Security rules during operations
2.4.  Security rules during maintenance

3.

MARKINGS

3.1. Stamps.
3.2. Identification plate.

4.

FEATURES OF THE MEWP

4.1    Description.
4.2    Technical data.
4.3    Configuration for road circulation.
4.4    Working diagrams.
4.5    Safety and emergency devices.
4.6    Allowable gradients.
4.7   Limits for the environmental working.
4.8    Acoustic emissions.
4.9

Further information.

5.

MOVEMENT

5.1    Road circulation.
5.2    Vehicle parking.
5.3    Assembly/Disassembly of the platform.

6. USE AND OPERATION

6.1. Condition and limits of use.
6.1.1. User Responsibility.
6.1.2. Use of personal protective gear.
6.1.3. Safety rules

–

Obligations and prohibitions.

6.2.    Installation and positioning on the workplace.
6.3.    Description of cab controls.
6.4.    Description of controls on baseframe.
6.5.    Description of basket controls.
6.6.    Description of hydraulic controls of stabilizer (emergency procedure).
6.7.    Description of hydraulic controls of booms (emergency procedure)

«
1
2
3
4
5
...
»

Содержание ECOLINE RS200











































































Отзывы:

Нет отзывов