RUTHMANN ECOLINE RS200 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 74

RUTHMANN ECOLINE RS200 Скачать руководство пользователя страница 27

USE AND MAINTENANCE MANUAL R68090150

ORIGINALE

RUTHMANN ITALIA S.r.l. Via Santa Maria del Piano di sotto,91/B

–

47854 Montescudo-Monte Colombo (RN) - ITALIA

pag. 27

G) Emergency stop push button

You have to push this button in case of imminent risk. All
movements of the platform and the engine of the vehicle stop
immediately. After having normalized the situation, you have to
release the switch M in order to reset all functions.
An emergency button is placed on chassis control box, on basket
control box and on remote control

4.6

ALLOWABLE GRADIENTS

The truck mount ECOLINE MEWP can compensate a maximum subframe inclination of 4° on both axles by
stabilizers.

The maximum allowable ECOLINE MEWP subframe inclinations are listed hereafter:

-

Towards front axle = 2,0 °

-

Towards rear axle = 5,0 °

-

Lateral

= 2,0 °

Additionally, the following pictogram shows the maximum slope of the terrain, in which the ECOLINE
MEWP can operate safely.

!

WARNING

DANGER! Do not use the platform on grounds that have higher gradients than those shown
in picture and controllable by means of the optic bubble installed on the chassis.

When  using  the  platform  under  these  permissible  maximum  slope  conditions,  and  especially  in  case  of
smooth  and  slippery  surfaces,  there  is  a  risk  of  slipping  of  the  vehicle.  The  ECOLINE  platform  must  be
secured  in  such  a  way  that  there  is  no  possibility  of  slipping.  Secure  the  ECOLINE  against  slipping  in  an
appropriate manner and measures (ex. by chains or ropes appropriate to the pull force and anchoring on
points that can support the mass of the vehicle).

!

WARNING

WARNING! Always check the inclination of the platform with the optical bubble. The
maximum permissible inclination cannot be exceeded.

4.7 LIMITS FOR THE ENVIRONMENTAL WORKING

The aerial working platform usually works by the following environmental conditions:
- minimum temperature: - 15°

«
...
25
26
27
28
29
...
»

Содержание ECOLINE RS200











































































Отзывы:

Нет отзывов