Rutenbeck REG-Switch SR 5, Руководство по эксплуатации

Страница: 13 / 20

13
Installation
Mounting
Attention: Work on
the 230-V-supply
may only be carried
out by authorized
electricians.
Danger for life! Dis-
connect the main
voltage at first for all
mounting works.
Pay attention to the actual
norms, in order to fulfil the gen-
eral safety requirements for tele-
communication systems and to
avoid disturbing interferences.
Take care that the minimum dis-
tance of 10 mm between data-/
telecommunication cables and
heavy-current cables are strictly
observed during the erection of
combined plants.
Crossed or uncrossed patch
cords (MDI/MDIx) can be used
optionally on each port.
Working in existing data net-
works require - if necessary -
the assent of the respective per-
son in charge of network and
data as well as a preceding data
security.
Please also observe the permit-
ted operating temperature, do
not place the DIN Rail-Switch di-
rectly beside devices with high
heat evolution (e.g. dimmer).
1 For mounting snap the DIN
Rail-Switch on the DIN rail.
2 For dismounting unlock the
release hook on the
housing’s lower rim of the