background image

21

Russound MCA-66 Installation Manual

SAFETY INFORMATION

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to alert 

the user to the presence of uninsulated dangerous 

voltage within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric 

shock to persons.

The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

Safety Instructions

1. 

Read Instructions - All the safety and operating instructions 

should be read before the appliance is operated.

2. 

Retain Instructions - The safety and operating instructions 

should be retained for future reference.

3. 

Heed Warnings - All warnings on the appliance in the 

operating instructions should be adhered to.

4. 

Follow Instructions - All operating and user instructions 

should be followed.

5. 

Water and Moisture - The appliance should not be used near 

water; for example, near a bathtub, washbowl, kitchen sink, 

laundry tub, in a wet basement, or near a swimming pool. 

The apparatus shall not be exposed to dripping or splashing 

liquids and no objects filled with liquids, such as vases, shall 

be placed on the apparatus. Do not touch the appliance 

with wet hands. Do not handle the appliance or power cord 

with wet or damp hands. If water or any other liquid enters 

the appliance cabinet, take it to qualified service personnel 

for inspection.

6. 

Cleaning - The appliance should be cleaned only as 

recommended by the manufacturer. From time to time you 

should wipe off the front and side panels and the cabinet 

with a soft cloth. Do not use rough material, thinners, alcohol 

or other chemical solvents or cloths since this may damage 

the finish or remove the panel lettering.

7. 

Ventilation - The appliance should be situated so that 

its location or position does not interfere with its proper 

ventilation. For example, the appliance should not be 

situated on a bed, sofa, rug, or similar surface that may 

block the ventilation openings, or placed in a built-in 

installation, such as a bookcase or cabinet that may impede 

the flow of air through the ventilation openings. Place the 

unit in a well-ventilated location, leaving at least 2 inches 

(5 cm) of clearance on all sides, top and rear of unit for air 

flow. If ventilation is blocked, the unit may overheat and 

malfunction.

8. 

Heat - The appliance should be situated away from heat 

sources such as radiators, heat registers, stoves, or other 

appliances (including amplifiers) that produce heat.

9. 

Grounding or Polarization - Precaution should be taken so 

that the grounding or polarization means of an appliance is 

not defeated.

10. 

Power Cord Protection - Power supply cords should be 

routed so that they are not likely to be walked on or pinched 

by items placed upon or against them, paying particular 

attention to cords at plugs, receptacles, and the point where 

they exit from the appliance.

11. 

Power Sources - The appliance should be connected to a 

power supply only of the type described in the operating 

instructions or as marked on the appliance.

12. 

Main Power Disconnect - The power switch is a double-pole 

switch. When the switch is in the “Off” position, the appliance 

is completely disconnected from the main power. 

13. 

Non-Use Periods - The power cord of the appliance should 

be unplugged from the outlet when left unused for a long 

period of time. 

14. 

Attachments - Only use attachments/accessories specified 

by the manufacturer. 

15. 

Carts and Stands - The appliance should 

be used only with a cart or stand that is 

recommended by the manufacturer. An 

appliance and cart combination should be 

moved with care. Quick stops, excessive force and uneven 

surfaces may cause the appliance and cart combination to 

overturn.

16. 

Wall or Ceiling Mounting - The appliance should be 

mounted to a wall or ceiling only as recommended by the 

manufacturer. 

17. 

Location of the Appliance - Do not mount this unit 

under a kitchen cabinet. Do not expose the appliance to 

direct sun light or heating units as the appliance internal 

components’ temperature may rise and shorten the life of 

the components. Avoid damp and dusty places.

18. 

Object and Liquid Entry - Care should be taken so that 

objects do not fall and liquids are not spilled into the 

enclosure through the openings.

19. 

Servicing - The user should not attempt to service the 

appliance beyond that described in the operating 

instructions. All other servicing should be referred to 

qualified service personnel.

20. 

Damage Requiring Service - The appliance should be 

serviced by qualified service personnel when: A. The power 

supply cord or the plug has been damaged; B. Objects have 

fallen, liquid has been spilled into the appliance; C. The 

appliance has been exposed to rain; or D. The appliance does 

not appear to operate normally; or E. The appliance has been 

dropped or the enclosure is damaged.

CAUTION:  TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE THE COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING 

TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE 

OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

Note: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 of 

the FCC rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one of or 

more of the following measures: reorient or relocate the receiving 

antenna; increase the separation between the equipment and 

receiver; connect the equipment into an outlet on a circuit 

different from that to which the  receiver is connected, or consult 

the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme 

NMB-003 du Canada.

Содержание MCA-66

























Отзывы: