DMS-3.1 Test Procedure
17
of
64
Load Firmware
1. Turn off the power switch for the Streamer.
Plug the USB Flash Drive in the Firmware Update port of the DMS-3.1
(The USB Flash Drive) will have files listed in the “Prepare USB Drive” section)
2. Plug the USB A-to-B cable from the PC to the USB B port below BridgeCo 2 module
inside the DMS-3.1 Streamer.
3. Plug the Russound Advanced Programming Cable from the PC Serial Port to the
J11 header of the DMS-3.1 Streamer. J11 is near the USB B port of the Streamer.
4. Ensure there is a black jumper installed on
J21
, jumper the two pins facing
BridgeCo module 3. This places the tuner processor in the “Run” position.
Ensure there is a black jumper installed on
J34
.
This enables the Apple Airplay Processor U17
5.
J28 will not have a black jumper on installed at this step.
6. Open Putty
Select the Streamer in the large window
Click the “Open” button
Содержание DMS-3.1
Страница 1: ......
Страница 27: ...SMS_USB_ _PWR_LED_Front_RevA_7_19_10 sch 1 Wed Jul 28 15 07 39 2010 ...
Страница 116: ......