8
电源线支承
电源线
电机外
罩上壳
INSTRUCTIONS FOR USE
I.
Getting started
Before using the appliance insert the plug into the power socket.
1. First, turn the support of power cord upward at 180
0
to release the power cord.
Fig. 4
2. Take the power plug attached to the power cord, and release the power
cord from the pothook. Finally, check whether the power cord has been
released from the pothook completely.
II.
Choice and Setting on The Height of The Floor
Choice and setting on the height of the floor brush:
When the floor brush (roller brush) works, you may adjust it to the appropriate position
by rotating the lifting knob of the floor brush according to the length of the carpet.
There are three height grades: high, middle and low (see Fig. 5).
When using accessories, please set the floor brush at the
“High” position to avoid
damaging carpet.
Fig.5
Power cord
Power cord support
Upper cover of
motor
