Russell Hobbs RHSM3500, Инструкции и гарантия

Страница: 8 / 23

8
SLICING, GRATING & JULIENNING IN THE PROCESSOR BOWL
CAUTION: The blades are extremely sharp. Handle with care to avoid injury.
NOTE: Always rest unit after 1 minute of operation.
• To set the processor bowl to be used with the slicing and grating discs, firstly select a
disc to be used.
• Sit the disc onto the detachable drive shaft in the processor bowl.
• Fit the lid onto the processor bowl, aligning the unlock symbol on the lid with the arrow
symbol on the side of the processor bowl.
• Place the food pusher in the feed chute.
• Press and hold the handle interlock, and twist the lid clockwise until the arrow symbol
on the handle interlock aligns with the locked symbol on the lid, then release the
handle interlock.
• Fit the motor unit onto the lid, arrow symbol on the motor unit with the unlocked
symbol on the bowl lid. Twist so that the locked symbol and the arrow symbol
are aligned, and the lid and the motor unit are tightly fitted together.
• Insert the plug into a wall power outlet and switch the outlet on. The blue LED will
illuminate around the speed buttons.
• Press and hold the Variable (I) or Turbo (II) speed buttons to start the motor.
NOTE: When using the Variable (I) speed button, the variable speed dial can be used on
speeds low (1) through to high (20) when pressing the ON button. To change the speed,
rotate the speed dial toward “20” to increase speed, and toward “1” to decrease
speed.
NOTE: The variable speed dial will not operate when the Turbo (II) speed is being used.
• Food can be added while the processor is running by removing the food pusher and
inserting food carefully through the feed chute.
CAUTION: Never use your fingers to direct food through the chute.
NOTE: Heavy pressure on the pusher does not speed up the processing; use the
pusher only as a guide. Let the processor do the work.
• Replace the food pusher in the feed chute.
• Release the speed button to stop the motor.
• After use, switch off the wall power outlet and remove the plug from the socket.
• To disengage the motor unit from the lid, twist the motor unit so that the arrow symbol
on the motor unit aligns with the unlocked symbol on the lid, then lift the motor
unit off the lid.
• To remove the lid, press and hold the handle interlock and twist the lid until the arrow
symbol on the side of the bowl aligns with the unlocked symbol on the lid. Lift the
lid off.
RHSM3500_IB_FA_270613.indd 8 27/06/13 2:24 PM