Russell Hobbs RHPC1000 Series, Инструкции и гарантия, Страница: 16 / 44

16
MULTI COOKER FUNCTIONS
ADJUST FUNCTION:
The adjust function allows to adjust the pre-set cooking time. It can be adjusted depending on
the quantity of food added to the cooking pot. A larger quantity may require more cooking time.
• Finish cooking preparation as per page 7.
• Press your desired cooking function, then within 10 seconds of pressing your menu
selection button, press the ADJUST button to determine the cooking time. The options are
Less, Normal or More.
Note: The default is Normal.
• Each time you press ADJUST it will scroll through and light up Less, Normal or More on the
control panel.
Refer to the COOKING MENU FUNCTIONS table on page 16 to determine how this will change
cooking times.
Note:
Once operation begins you cannot use the adjust button. If required you can change the
function by pressing the Keep Warm/Cancel button and re-select the function required.
Note: The adjust function can be used for all menu selections except for Steam, Slow Cook &
Manual – refer to the Cooking Menu Functions table on page 16 for more details.
DELAY START FUNCTION:
Show control panel image
The delay start function allows you to add your ingredients into the multi cooker and postpone
the cooking function. This means you can delay the end of the cooking cycle in order to have
your food ready to be served at a more suitable time.
Note:
The time set will be when the multi cooker will finish cooking. For example, if you want
your meal to be cooked and ready to eat in 6 hours, select “6:00” using the instructions below.
IMPORTANT: Do not use the delay start function when cooking perishable ingredients
including meat, dairy, eggs, poultry and fish as they may spoil.