6. After use, turn the temperature dial to the
“0”/ “OFF”/ “MIN”
position to switch off.
7. Disconnect the iron from mains power supply outlet.
8. Follow cleaning and maintenance instructions.
STEAM IRONING
This function can only be used at a higher ironing temperature
– moderate or max position.
1. Fill the iron as described in "
How to Fill the Water Tank"
.
2. Connect the iron to a suitable mains power supply outlet.
3. Turn the temperature dial to the
MAX
position.
4. The pilot light will glow to indicate that the iron is heating up.
5. The pilot light will go off when the required temperature is reached. During ironing,
the pilot light on the iron automatically switches on/off as the thermostat maintains
the set temperature (you may continue ironing during this process).
6. The iron is ready for use.
7. Set the steam knob correctly. Increase steam output by pushing the steam knob to
the right and decrease steam output by pushing the steam knob to the left.
Caution: Synthetic fabric, Nylon, Synthetic Silk and Silk cannot be steam ironed as
it will damage the finish of the fabric.
8. After use, turn the temperature dial to the
“0”/ “OFF”/ “MIN”
position - the iron is
now switched off.
9. Disconnect the iron from mains power supply outlet.
10. Follow the cleaning and maintenance instructions.
BURST OF STEAM
This function works well for tough wrinkles and heavy fabrics. By pressing the steam
button, an intense burst of steam is emitted from the soleplate. This can be very useful
when removing stubborn creases. This function can be used once the iron has reached
maximum temperature.
For optimal results, there should be a five (5) second interval between presses of the
steam button. To prevent leaking water from the soleplate, do not press the steam button
continuously for more than three (3) seconds.
