Russell Hobbs RHI 102, Инструкция и гарантийный талон

Страница: 5 / 39

5
OPERATING INSTRUCTIONS
HINTS FOR IRONING:

Sort out the articles to be ironed into groups according to the type of fabric. This
will minimise the frequency of temperature adjustment for different garments.

Test the iron on a small area or on the back or inside of the garment if you are
unsure about the type of fabric. Start with a low temperature and gradually
increase the temperature.

Wait for about three minutes after adjusting the temperature before ironing heat
sensitive fabrics. Temperature adjustments need a certain time to reach the
required level, no matter if it is lower or higher.

Delicate fabrics such as silk, wool, velour, etc are best ironed with an ironing
cloth cover to prevent shine marks .

You may need to press the spray button a few times in order to activate the spray,
burst and vertical burst functions.

Heating up is quicker than cooling down, so being ironing the clothes which
require a lower ironing temperature first (Synthetic fibre fabric and silk) and then
iron other clothes of different material that require a higher temperature in the
correct order (Wool, cotton and linen).
READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE
FOLLOWING:
TEMPERATURE CONTROL SETTING

Acetate

Elastene

Polyamide

Polypropylene

Cupro

Polyester

Protein

Silk

Triacetate

Viscose

Wool

Cotton

Linen