background image

Semi-electronic iron

steam/spray/shot

Please read and keep these instructions

Getting the best from your new iron....

Safety first

Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.

Self-clean

Your iron will give the best ironing results and will last longer if you
clean the soleplate once a month, see ‘Maintenance’ on pages 6 & 7.

RN40692 MUK Rev 3

If you have a problem or complaint, please call our dedicated UK based helpline

before returning your product to the retailer from where it was purchased.

UK Helpline:  0844 871 0953 
Replacement Parts:  0844 873 0719
Ireland Helpline:  1800 409 119

!

To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.

Upon registration with Morphy Richards

(UK & ROI only)

Register  online  for  your  2  year

guarantee.  See  back  of  this

instruction book for details.

(UK and Ireland customers only)

www.morphyrichards.co.uk

RN40692MUK Rev3:RN40692 MUK Rev 3  01/12/2009  11:52  Page 1

Содержание SEMI-ELECTRONIC IRON RN40692









Отзывы: