13
.
Rinse aid dispenser
For Customer Services & Spare Parts please call
0845 209 7461
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
:
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
1
2
3
Th e rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a p roblem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly o r are show spots, adjust the dial to the next
higher lever un til your dishes are sp ot-free. The recommended setting is "4".
(Factory value is "4".)
Increase the dose if there are drops of water o r lime spots on the dishes after washing.
Reduce it if there are sticky whitis h stains on your dish es o r a bluish film on glassware or
knife blades.
during the next wash.
Don't forget to re place the cap be fore you close dis hwa sher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
