30
Water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is
fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear. This precaution is needed to avoid the risk of the
water inlet getting blocked and damaging the appliance.
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the
sink, making sure to avoid bending or crimping it. Use the special plastic support that comes
with the appliance . The top of the hose must be at a height between 40 and 100cm. The free
end of the hose must not be immersed in water to avoid the back flow of it.
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B, C
φ
40mm
A
B
C
Counter
Front
Drain pipe
Drain hose hook
Close the drain hose hook to the counter
NOTE
The top of the hose
must be at a height
between
40 and 100cm.
The free end of the
hose must not be
immersed in water.
