24
Adding a dish during a cycle
A forgotten dish can be added at any time before the detergent cup opens.
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open the door completely.
3. Load the forgotten dishes.
4. Close the door, the dishwasher will start running again after 10 seconds.
At the end of the wash cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8
seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the
water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes
and utensils while they are still hot and more susceptible to breakage. They will also
dry better.
Switch off the dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15
minutes before removing from the appliance. Open the dishwasher's door, leave it ajar and wait a
few minutes before removing the dishes. In this way they will be cooler and the drying will be
improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper
Basket onto the dishes in the lower one.
Washing cycles
It is dangerous to open the door when washing, because the hot water may scald you.