14
HOW TO PROGRAM DISPENSING VOLUME
Ensure that there is enough water in the water reservoir before programming the coffee dispensing
volume.
1. Place an empty cup under the dispenser spout.
2. Move the operating handle back completely.
3. Insert a capsule so that it falls straight into the compartment correctly.
4. Close the operating handle firmly to load the capsule.
5. Press the desired button
（
Short or Normal Espresso button) and hold it pressed down.
6. The corresponding button indicator will flash in a white colour and the machine will enter
programming mode.
7. Once the desired volume has been reached, release the button. The button is now
programmed to your preference.
8. After the programming, the dispensing size will have been recorded in the appliances
memory. For next use, press the button normally and press only once.
9. You may program the other button if desired.
Note the volume range:
20ml-150ml based on Nespresso capsules.
The default size is 30ml (Short/ Ristretto) and 60ml (Normal Espresso).
Tip: when the programming process has finished, leave the machine for 30 seconds so that it may
cool down prior to opening the operating handle.
ENERGY-SAVING MODE
The appliance enters energy-saving mode automatically once the machine is idle for 15 minutes.
The Short and Normal Espresso indicator lights will flash cyclically indicating that the machine has
entered energy-saving mode. If you would like to exit the energy-saving mode, please press any
button. The appliance will start to warm up and the lights will flash
.
Once the buttons are solid/
steady, the machine is ready to brew coffee.
