11
have been brewed.
Once you have followed the descaling process
in this manual, the middle LED indicator will
turn off.
FILLING OR RE-FILLING THE WATER RESERVOIR
Before using this appliance for the first time or after long periods of not operating the appliance, the
machine must be rinsed out. This short procedure will rinse and clean the internal piping
thoroughly.
First note that there are two ways to fill the water reservoir: directly into the water reservoir by
using for example a jug or by removing the water reservoir from the appliance.
Filling
without removing the water reservoir:
Lift the water reservoir lid.
Fill the water reservoir up to the “MAX” level mark with cold fresh water (the maximum
capacity is 0.65 litres), or fill at least to
the “MIN” level mark.
Lower and close the water reservoir lid.
Filling
by removing the water reservoir:
Lift the water reservoir up and remove the water reservoir from the appliance.
Fill the water reservoir up to the “MAX” level mark with cold fresh water (the maximum
capacity is 0.65 litres), or fill at least to
the “MIN” level mark.
Slide the water reservoir slowly on to the water reservoir base. When the water reservoir
outlet is inserted on to the inlet receptacle, push it down firmly to lock the water reservoir
into place.
RINSING THE APPLIANCE AND ITS INTERNAL PIPING
1. Open the operating handle.
2. Fill water reservoir to maximum level mark.
