Russell Hobbs RHAP3501, Руководство по эксплуатации

Страница: 7 / 16

RHAP3501 7 Revision 1.8
FOR THE FIRST TIME
Turning On the Purifier
Ensuring that all the filters are in place, press the
‘On/Standby’ button located on the control
panel
If your purifier fails to turn on, ensure that all
the filters have been correctly assembled as
shown earlier in this manual.
Auto Mode
 Once the Air Purifier has warmed up, press the AI
button to enter Auto Mode.
 Auto mode automatically adjusts the fan speed
according to the air quality.
Night Mode
If Air Quality is above 50
μ
g/m3, air flow is increased to aid air
purification.
If Air Quality is below 50
μ
g/m3, the air purifier enters low
speed / noise mode.
Timer
Set for 1/2/4/8 hours. Hold for 3 seconds to reset the sensor
of HEPA filter after replacement, HEPA filter replacement
prompt will disappear and re-timing of HEPA filter will begin.