Maintenance & Cleaning
1. Cut off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a bowl to catch the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard water chemicals, as these will clog the
spray arm jets and bearings.
Wash the arms in warm soapy water and use a soft cleaning brush to clean the jets. Replace
them after rinsing them thoroughly in clean water
How to Keep your Dishwasher in the Correct Condition
After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so
that moisture and odours are not trapped inside.
Remove the Plug from the socket
Before cleaning or performing maintenance, always remove the plug from the socket.
.
40
To remove the upper spray arm, hold the nut and at
the same time rotate the arm clockwise to remove
it.
To remove the lower spray arm, pull the spray arm
upward.
Upper spray
arm
Lower spray
arm
Pull
