For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at
www.productcareuk.com
10
Installation
Feet adjustment
•
Adjust the level of washing machine by the adjustable feet. Please check if there is a
gap between the four adjustable feet and the floor. If there is then adjust the level of
the washing machine by turning the adjustable feet. Make sure that the machine does
not sway and that it is completely level. After the adjustment is finished, turn the fixing
nuts up tightly, so that the adjustment that has been made is fixed.
NOTE
The machine should not sway and all the adjustable feet should touch the floor.
Location of the Washing Machine
•
Check location where the appliance will be installed. Make sure you have everything
necessary for correct installation.
•
Do not place or store your appliance below 0°C (32°F) to avoid any damage from freezing.
•
Do not place or store laundry products on top of the appliance at any times.
•
Install the appliance on a horizontal solid, flat, non-slippery and tough floor. Do not
install onto a carpet.
•
If the appliance is installed on an unsuitable floor, it could make considerable noise,
vibrate severely and cause a malfunction. If the appliance is not level, adjust the feet up
or down for horizontal installation.
•
Never put cardboard, wood or other materials under your machine to try and stabilise
the unit.
•
Ventilation openings must not be obstructed.
•
Leave a space (right & left : 2cm, rear : 10cm).
•
In case of built-in installation, the distance
between top of the washer and bottom of
upper plate should be at least 3mm.
