simultaneously and lift the motor unit off the lid.
• To remove the lid, press and hold the handle interlock and twist the lid anti-clockwise
until the arrow symbol on the handle aligns with the unlocked symbol on the lid. Lift the
lid off.
SLICING & GRATING
CAUTION: The blades are extremely sharp. Handle with care to avoid injury.
• To set the processor bowl to be used with the slicing and grating discs, select a slicing
or grating plate and clip into the processor disc.
NOTE: The plates have two locking tabs – long at one, short at the other. To fit the
plates into the processor disc, insert the end with the short tab first, then push down
the end with the long tab until it locks into place.
• Sit the processor disc onto the central axis in the processor bowl.
• Fit the lid onto the processor bowl, aligning the
on the lid with the on the
processor bowl handle.
• Place the food pusher in the feed chute.
• Press and hold the handle interlock, and twist the lid clockwise until the on the
handle interlock aligns with the locked symbol on the lid.
• Fit the motor unit onto the lid, aligning the release buttons on the motor unit with the
recesses on the lid. Push together until they click, and the lid and the motor unit are
locked together.
• Insert the plug into a wall power outlet and switch the outlet on. The blue LED will
illuminate around the ON and TURBO buttons.
• Press and hold the ON or TURBO button to start the motor.
• The variable speed dial can be used on speeds low (-) through to high (+) when
pressing the ON button. To change the speed, rotate the speed dial toward the “+”
increase speed, and to the “-“ to decrease speed.
•
Food can be added while the processor is running; remove the food pusher and insert
food carefully through the feed chute.
CAUTION: Never use your fingers to direct food through the chute.
NOTE: Heavy pressure on the pusher does not speed up the processing; use the
pusher only as a guide. Let the processor do the work.
•
Replace the food pusher in the feed chute.
• Release the ON or TURBO button to stop the motor.
• After use, switch off the wall power outlet and remove the plug.
• To disengage the motor unit from the lid, press the attachment release buttons
simultaneously and lift the motor unit off the lid.
• To remove the lid, press and hold the handle interlock and twist the lid anti-clockwise
until the arrow symbol on the handle aligns with the unlocked symbol on the lid. Lift the
lid off and remove the processor disc.
RHSM3000_FA_120712.indd 8
18/07/12 12:25 PM