INSTRUCTIONS
BEFORE USE
CAUTION: The blades are extremely sharp. Handle with care to avoid injury.
•
Carefully remove all contents from the box.
•
Wash all removable parts as instructed in the ‘Cleaning’ section of this book.
•
Remove all packaging material and any stickers from the product.
•
Some parts may be packed separately, check to ensure all items have been unpacked
before disposing of packaging.
USING THE MIXER SHAFT
The mixer shaft is ideal for preparing sauces, soups, cocktails, milk-shakes,
mayonnaise and baby food preparations.
•
Connect the shaft to the motor unit, aligning the shaft release buttons with the grooves
inside the mixer shaft. Push together until the attachment release buttons lock into
position. The shaft and the motor head are now tightly fitted together.
•
Insert the plug into a power outlet and switch the outlet on.
•
To avoid splashing, place the mixer shaft into your preparation before operating the
mixer.
•
Press and hold the ON or TURBO button to start the motor.
•
The variable speed dial can be used on speeds low (-) through to high (+) when
pressing the ON button. To change the speed, rotate the speed dial toward the “+”
increase speed, and to the “-“ to decrease speed.
•
Make a rotating, up and down motion to obtain even blending of the food.
•
Release the ON or TURBO button to stop the motor.
•
After use, switch off the wall power outlet and remove the plug.
•
To disengage the mixer shaft from the motor unit, push the attachment release buttons
simultaneously and carefully pull the mixer shaft away from the motor unit.
USING THE WHISK
The whisk is ideal for preparing pancake mix, stiffening egg whites, whipping cream, etc.
•
Insert the whisk into the whisk drive.
•
To assemble the whisk, align the notches on the whisk shaft with the grooves in the
whisk drive and push in until it locks into place.
•
Connect the whisk assembly to the motor unit, aligning the shaft release buttons
with the grooves inside the whisk drive. Push together until the attachment release
buttons lock into position. The whisk assembly and the motor unit are now tightly fitted
together.
•
Insert the plug into a power outlet and switch the outlet on.
•
Press and hold the ON or TURBO buttons to start the motor.
RHSM3000_FA_120712.indd 6
18/07/12 12:25 PM