•
The variable speed dial can be used on speeds low (-) through to high (+) when
pressing the ON button. To change the speed, rotate the speed dial toward the “+”
increase speed, and to the “-“ to decrease speed.
•
Release the ON or TURBO button to stop the motor.
•
After use, switch off the wall power outlet and remove the plug.
•
To disengage the whisk from the motor unit, push the attachment release buttons
simultaneously and carefully pull the whisk away from the motor unit.
•
To disband the whisk assembly, pull the whisk away from the whisk drive.
USING THE PROCESSOR BOWL
The processor bowl can be used for chopping, slicing and grating and is ideal for
chopping parsley, onions, nuts, bread crumbs, biscuits, baby food, and slicing and
grating fruits, vegetables and cheeses etc.
CHOPPING
CAUTION: The blades are extremely sharp. Handle with care to avoid injury.
• To set the processor bowl to be used with the chopper blade, sit the chopper onto the
central axis in the processor bowl.
• Place the food into the bowl.
• Fit the lid onto the processor bowl, aligning the on the lid with the on the
processor bowl handle.
• Place the food pusher assembly in the feed chute.
• Press and hold the handle interlock, and twist the lid clockwise until the on the
handle interlock aligns with the locked symbol on the lid.
• Fit the motor unit onto the lid, aligning the release buttons on the motor unit with the
recesses on the lid. Push together until they click, and the lid and the motor unit are
locked together.
• Insert the plug into a wall power outlet and switch the outlet on. The blue LED will
illuminate around the ON and TURBO buttons.
• Press and hold the ON or TURBO button to start the motor.
• The variable speed dial can be used on speeds low (-) through to high (+) when
pressing the ON button. To change the speed, rotate the speed dial toward the “+”
increase speed, and to the “-“ to decrease speed.
•
Food can be added while the processor is running; remove the food pusher and insert
food carefully through the feed chute.
CAUTION: never use your fingers to direct food through the chute.
•
Replace the food pusher in the feed chute.
• Release the ON or TURBO boost button to stop the motor.
• After use, switch off the wall power outlet and remove the plug.
• To disengage the motor unit from the lid, press the attachment release buttons
RHSM3000_FA_120712.indd 7
18/07/12 12:25 PM