background image

 

CLEANING AND MAINTENANCE 

 

After use, lift the iron with the water inlet filling hole downwards to empty the 

remaining water from the water tank into the sink. 

 

Insert the plug into the socket and set the temperature to MAX for 1-2 minutes to 

evaporate the remaining water.  Once done, turn the dial to “0”/ “OFF”/ “MIN”, unplug 

the iron and let it cool down before storing it. 

 

This appliance is for household use only and is not serviceable.  

 

Do not open or change any parts by yourself. Please refer to a qualified electrical 

service department or return to the supplier if servicing is necessary. 

 

Always remember to unplug the unit from the electrical outlet when not in use and 

before cleaning. Ensure that the temperature dial is set to “0”/ “OFF”/ “MIN”.    

 

Ensure that the steam knob is set to the “0”/ “no steam”/ “OFF” position. 

 

Wipe the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.  Once 

done, buff the soleplate with a clean dry cloth. 

 

If fibre has adhered/ stuck to the soleplate, use a damp cloth with vinegar to wipe the 

fibre from the soleplate. 

 

If scale has blocked a steam hole, please remove it gently using a toothpick.  Be 

careful not to damage the surface of the soleplate 

 

The body of the appliance should be cleaned with a damp cloth. Do not let water 

enter the appliance and cause damage to any electrical components. 

 

Do not use bleach or other abrasive substance or solvents to clean your appliance as 

it can be damaging to the finish. 

 

Do not immerse the appliance in water or any other liquid or hold it under a running 

tap to clean. 

 

 

Note:

  Never use sharp or rough objects to remove deposits from the soleplate.  Never use 

any abrasive or descaling agents to clean the iron. 

 

STORING THE APPLIANCE 

 

 

Complete Cleaning and Maintenance as instructed above.   

 

Ensure that the steam knob is set to the “0”/ “no steam”/ “OFF” position. 

 

Ensure that all parts are dry before storing.  

 

Store only once the iron has cooled completely. 

 

Store the appliance vertically in its box or in a clean, dry place.  

 

Never store the appliance while it is still wet or dirty. 

Содержание 23972ZA

















Отзывы: