8
Spray
Water spotting affects some fabrics. Test this out on a hidden part of the fabric.
• This works with dry or steam ironing, as long as there is water in the water tank.
• Check that there is water in the water tank.
• Lift the iron off the fabric.
• Aim the spray nozzle at the fabric.
• Press the spray mist
button.
• You may have to press it 2 or 3 times to pump water through the system.
Steam Shot
This works with both dry and steam ironing, as long as there is water in the water tank.
• Check that there is water in the water tank.
• Check that the temperature control is at
or higher.
• Press the steam shot
button.
• You may have to press it 2 or 3 times to pump water through the system.
• Leave 4 seconds between bursts, to let the temperature build up.
Dry Ironing
• Move the steam control to
.
• Wait until the thermostat light is steady, then start ironing.
Vertical Steaming
Vertical steaming removes wrinkles from hanging clothes, hanging curtains, and furnishing
fabrics.
• Check that there is adequate ventilation behind the fabric, otherwise moisture may build up,
causing mildew.
• Check that there is nothing behind the fabric that may be damaged by steam.
• Check that pockets, turn-ups, and cuffs are empty.
• Check there is water in the water tank.
• Turn the temperature control dial to max, move the steam control to
.
• Hold the iron close to (but not touching) the fabric.
