5
Before using electrical appliances, basic safety precautions should always be followed.
Before Using For the First Time
Fill the water tank with clean water, and then empty the water to ensure the tank is clean of any
manufacturing residues. Refill the tank.
• The iron may give off an odour and small amount of vapour when switched on for the first
time. This is normal and will stop as the element cures.
• Press the steam shot button 3 or 4 times,
to prime and flush clean water through the burst
of steam pump
• Press the spray mist button
3 or 4 times,
to prime and flush clean water through the
spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
Auto Shut-Off
• The iron will switch itself off if it’s motionless for 30 seconds with the soleplate down, or on
its side, or 8 minutes sitting upright.
• Lift it, tilt it forward, then sit it upright to return to its operating temperature (25-45 seconds,
depending on the setting).
Preparation
• Check for textile care symbols
on items to be ironed.
• Begin your ironing with fabrics that need low temperatures
, then those that need
medium temperatures
, and finish with those needing high temperatures
.
FILLING
VERTICAL STEAMING
MIST
AFTER USE
STEAM SHOT
SELF CLEAN
