Rush MH 5 Profile, Руководство пользователя

Страница: 26 / 44

26 RUSH MH 5 Profile User Manual
Use gentle pressure only when cleaning, and work in a clean, well-lit area. Do
not use any product that contains solvents or abrasives, as these can cause
surface damage.
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10
minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of
the fixture and the air vents at the back and sides of the head and in the
base with low-pressure compressed air.
3. Clean the LED lenses by wiping gently with a soft, clean lint-free cloth
moistened with a weak detergent solution. Do not rub the surface hard: lift
particles off with a soft repeated press. Dry with a soft, clean, lint-free cloth
or low-pressure compressed air. Remove stuck particles with an
unscented tissue or cotton swab moistened with glass cleaner or distilled
water.
4. Check that the fixture is dry before reapplying power.
Fuse replacement
If you need to replace a fuse:
1. Disconnect the fixture from power and allow it to cool for at least 10
minutes.
2. Unscrew the cap of the fuseholder (see Fixture overview on page 14) and
remove the fuse. Replace with a fuse of the same size and rating only.
3. Reinstall the fuseholder cap before reapplying power.
Gobo replacement
Optical components have fragile coatings and are exposed to very high
temperatures. Handle and store components with care. Wear cotton gloves
while handling them. Keep them perfectly clean and free of oil and grease to
reduce the risk of heat damage.
The rotating gobos can be replaced with custom aluminum gobos in the
following size:
•
Gobo size: 24 mm (0.94 in.)
•
Gobo image size: 20 mm (0.79 in.)
•
Gobo thickness: 0.3 mm
Gobos are exposed to thermal stress. Custom gobos must be constructed to
the same quality standards as the original items.